94 infinity q45, power wire through firewal

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91372
Printed Date: May 01, 2025 at 9:58 PM

Topic: 94 infinity q45, power wire through firewal

Posted By: blabla125
Subject: 94 infinity q45, power wire through firewal
Date Posted: March 07, 2007 at 12:23 PM

Hello,

sorry if this is the wrong forum to post this...

I was wondering if anyone has ran a power wire through the firewall of a 1994 infinity Q45. I looked at the service manual and there appears to be a few places where wires go through the firewall but the gromet they go through seems to be too tight to fit anymore wires in.

Replies:

Posted By: h2oskierfl
Date Posted: March 10, 2007 at 8:30 AM

you may need to make your own hole. If its an automatic, there may be a clutch plate that you can drill through. Otherwise, just find a spot that has clearance on both sides and drill there. Just be sure to double check everything before you start blasting holes and also be sure to use a grommet.

Print Page | Close Window