tach, 05 frontier
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91374
Printed Date: May 17, 2024 at 5:19 PM
Topic: tach, 05 frontier
Posted By: dohno
Subject: tach, 05 frontier
Date Posted: March 07, 2007 at 12:52 PM
Im trying to instal a Autometer tach into an 05 nissan frontier. Iv been told it couldn't be done, and after looking and finding out the Tach has an AC signal, im not sure what to do, Can this be done? What do i need to get and do?
Replies:
Posted By: Velocity Motors
Date Posted: March 08, 2007 at 7:57 AM
The Autometer will accept an AC signal, just tap into an injector or the coil.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: BNLUIS
Date Posted: March 08, 2007 at 12:16 PM
Hope this helps I always get the tach wire insde the car whenever I do Remote starters on this car the Tach wire is Pink/Blue and is behind the instrument cluster, but I take a shorthcut , if you look Way above the brake pedal, you will see a bundle of wire leading behind the cluster , there are about 2 wires make sure you get the right one, or do as Velocity Motors posted.
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
|