Print Page | Close Window

door trigers for 97 expedition

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9166
Printed Date: May 07, 2025 at 4:26 AM


Topic: door trigers for 97 expedition

Posted By: moesounds
Subject: door trigers for 97 expedition
Date Posted: February 07, 2003 at 12:23 AM

I have a 97 ford expedition and I was wondering if someone could guide me thru the door trigger process.  About 2 hours after the alarm is set the alarm goes off.  when I disconnect the door triggger it doesnt do this.



-------------
kmoe



Replies:

Posted By: BNLUIS
Date Posted: February 07, 2003 at 10:00 AM

Did u use a positive door tgigger???? If so try this wire a Light Blue \ White

DOOR TRIGGER|lt. blue/white *3   |-  |keyless module *2  

*2 The keyless module is located high in the drivers kick against the firewall.  *3 One of two. The wire is in pin 11 and it is next to the BLACK/ pink wire. Test with a digital multi-meter ONLY, to keep from damaging the circuit tied into the other lt. blue/white.

Good luck and test all wires whenever possible.



-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.


Print Page | Close Window