Print Page | Close Window

my panel lights dont work

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93290
Printed Date: June 03, 2024 at 9:57 PM


Topic: my panel lights dont work

Posted By: deathbyillusion
Subject: my panel lights dont work
Date Posted: April 24, 2007 at 1:28 PM

im trying to install a new car stereo for my 1997 honda accord and i cut the wires from the old plug so that i can hook the new plug with wires to the old wires. now after i did that my clock light doesnt come on unless i push the button like if my car was turned off. my reverse, nuetral, and drive lights below where the handle is to select which one you want to put it in. the air and heater lights wont work except the green led ones and the the lights where the speed and gas info and stuff is those lights dont come on eather what do i need to do to fix that somebody let me know asap thanks and sorry if i gave a poor explanation i dont know much about cars.



Replies:

Posted By: mikvot
Date Posted: April 27, 2007 at 10:44 PM
Sounds like you cut into more than one wire at a time. You probably just blew a fuse. Check all the fuses in the vehicle.

-------------





Print Page | Close Window