Please help convert to rca jacks

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9366
Printed Date: May 01, 2025 at 12:51 PM

Topic: Please help convert to rca jacks

Posted By: sugarsnacks
Subject: Please help convert to rca jacks
Date Posted: February 11, 2003 at 9:30 AM

I am installing a subwoofer amp in a 93 Nissan Altima and cannot seem to figure out the right way to use the line output converter.The car has two factory clarion amps ,the wiring is somewhat confusing .It seems to have shielded cables for the speakers . I have tried a couple different wires and have had little to no luck.can someone please tell me what wires to connect into? please help ????

-------------
100% V8 fast&furious 4 bangers are for mommas boys

Replies:

Posted By: Velocity Motors
Date Posted: February 11, 2003 at 12:24 PM

Go straight to the rear speakers for your speaker inputs for the LOC module.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: sugarsnacks
Date Posted: February 11, 2003 at 1:11 PM

loc module? There are about 11 or 12 wires in the amp harness.

-------------
100% V8 fast&furious 4 bangers are for mommas boys

Posted By: Velocity Motors
Date Posted: February 11, 2003 at 5:09 PM

The LOC ( line out converter ) uses speaker inputs as your modules input signal. So, go straight to the back of the rear speakers for the two wires of each speaker & wire them into the LOC instead of fooling around with the Clarion amp harnesses.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window