Print Page | Close Window

2007 Chevy Silverado Radio Wiring Diagram

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93982
Printed Date: April 26, 2024 at 10:14 AM


Topic: 2007 Chevy Silverado Radio Wiring Diagram

Posted By: wormwarrior25
Subject: 2007 Chevy Silverado Radio Wiring Diagram
Date Posted: May 16, 2007 at 7:06 PM

hi im just looking for the wires needed to install an aftermarket radio. i have the new body 2007 silverado. i dont care if the onstar or door chimes work. i would like to just hook up my radio. any help would be greatly apprieciated. thanks




Replies:

Posted By: wire4veins
Date Posted: May 17, 2007 at 10:46 PM
Here is the info in your vehicle:

Radio 12v      RED / white       +       radio harness
Radio Ground      black       -       radio harness
Radio Ignition      (GMLAN Serial Data)            
Radio Illumination      yellow (dimmer)       +       radio harness
Factory Amp Turn-on      same as power antenna wire            
Power Antenna      white       +       radio harness
LF Speaker +/-      tan - gray       +,-      radio harness or amplifier
Notes: If equipped, the amplifier is under the rear of the center console.

At the amplifier, the left subwoofer wires are dk. blue/white (+) - lt. GREEN/ black (-). The right subwoofer wires are dk. green (+) - lt. blue/black (-).
RF Speaker +/-      lt. green - dk. green       +,-      radio harness or amplifier
LR Speaker +/-      brown - yellow       +,-      radio harness or amplifier
RR Speaker +/-      dk. blue - lt. blue       +,-      radio harness or amplifier

This information is a reference only. Always verify all circuits by using a DVM.

-------------
wire4veins
"D"
Precision Autosound - Owner
MECP Master Installer




Posted By: wormwarrior25
Date Posted: May 18, 2007 at 3:54 PM
thanks for the quick reply




Posted By: uprvrndn
Date Posted: June 17, 2007 at 12:00 PM
I do not have a white wire on any of the factory harnesses for the power antenna/amp power on. is there a pin number associated with it





Print Page | Close Window