97 jeep gc factory alarm disable?
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96438
Printed Date: May 03, 2024 at 9:22 AM
Topic: 97 jeep gc factory alarm disable?
Posted By: 929freak
Subject: 97 jeep gc factory alarm disable?
Date Posted: August 16, 2007 at 12:03 AM
hello everyone!! I did search on here and found out that if I ground the violet / YELLOW wire in the dfriver door boot it will keep the factory alarm in the disarm state...here is the prob,I had a alarm, keyless,remotestart installed,the factory alarm .blows when I arm(don't like that) and when I remote start it sets off the factory alarm if I dont disarm first(too much to remember,ha ha) I did ground the violet/yel wire, great no more beep on arm and no alarm when I remote start,only prob is when I arm(lock the doors w/ transmitter) the interior lights stay on!!! (arghhhhh)does anyone have an easier solution?? any hel pis GREATLY appreciated.......
Replies:
Posted By: quartersj77
Date Posted: August 22, 2007 at 9:32 PM
5 wire the disarm wire with the out put from ur unit, what unit are u using?
-------------
Its true, its true!
Posted By: jeepman0104
Date Posted: September 10, 2007 at 8:57 PM
hey i have the same problem with my jeep, the alarm is screwing everything up and i need to disarm it. does anyone know which wire it is, is it purple with a yellow stripe or yellow with purple stripe?
|