Print Page | Close Window

90 Celica Power Antenna

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9713
Printed Date: May 06, 2024 at 3:08 PM


Topic: 90 Celica Power Antenna

Posted By: TheFloyd
Subject: 90 Celica Power Antenna
Date Posted: February 18, 2003 at 7:16 PM

 I would like to make the power antenna work with my aftermarket stereo.   I have tried hooking the 12v acc wire from my headunit to the antenna's wires without any luck.   The antenna assembly itself has a 6 wire connector with two larger wires which are +12V and ground and 4 smaller wires.  Two are BLACK/ red , one is grey/pink  (or maybe pink/grey...I looked at it yesterday so i don't remember exactly) and the other wire is....well i don't remember that one either.  Anyways, the BLACK/ red and grey/pink  are on my factory headunit connector, so i suppose that those two are the ones that matter to make the antenna work. 

    .....anyway, long story short, if anyone knows what i need to do with these wires to make the antenna work, i'd greatly appretiate if you could tell me

  thanks 

     




Replies:

Posted By: achang7
Date Posted: February 18, 2003 at 11:24 PM
just hook up the aftermarket headunit with a toyota wire harness and it should work. The factory toyota harness is on the right wall after you take out the headunit. It should be a pair of harness, one is for the rear speakers and the other is for the fronts and other wires.




Posted By: TheFloyd
Date Posted: February 19, 2003 at 4:46 PM
     I suppose i could buy a wire harness, but it would be pretty lame to waste money on it just for the antenna.




Posted By: BILL01
Date Posted: February 24, 2003 at 4:57 PM
hook both wires together they r up&down wires

-------------
PIONEER





Print Page | Close Window