2007 hummer h2, remote start wiring
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97484
Printed Date: May 02, 2025 at 12:34 AM
Topic: 2007 hummer h2, remote start wiring
Posted By: uwDawson
Subject: 2007 hummer h2, remote start wiring
Date Posted: September 27, 2007 at 11:51 AM
I need wiring diagram for 07 hummer h2, remote start. thanks
Replies:
Posted By: kola7126
Date Posted: September 27, 2007 at 12:47 PM
| MODEL | YEAR(S) | | H2 | 2003 -2006 |
| KEY | T-HARNESS | IMMOBILIZER | | N/A | N/A | Has NEW PASSLOCK II Anti-Theft System, Requires Part #XK06 Module |
| PART | COLOR | LOCATION | DIAGRAM | | 12 VOLT CONSTANT | RED (+) and RED / WHITE (+) | @ IGNITION SWITCH HARNESS | | | STARTER | YELLOW (+) | @ IGNITION SWITCH HARNESS | | | STARTER 2 | N/A | | | | IGNITION 1 | PINK (+) | @ IGNITION SWITCH HARNESS | | | IGNITION 2 | WHITE (+) | @ IGNITION SWITCH HARNESS | | | IGNITION 3 | N/A | | | | ACCESSORY /HEATER BLOWER 1 | ORANGE (+) | @ IGNITION SWITCH HARNESS | | | ACCESSORY /HEATER BLOWER 2 | BROWN (+) | @ IGNITION SWITCH HARNESS | | | KEYSENSE | N/A | | | | PARKING LIGHTS ( - ) | GRAY/BLACK (-) | @ BCM. BROWN Plug, Pin B2, See NOTE *1 | | | PARKING LIGHTS ( + ) | BROWN (+) Left and BROWN / WHITE (+) Right, will require both! See NOTE *2 | in DRIVERS KICK PANEL, Harness to Rear of Vehicle, See DIAGRAM | 26500_H2_DUAL PARKING LIGHT DIAGRAM.pdf | | POWER LOCK | LIGHT BLUE (TYPE B) | @ BCM, PURPLE Plug, Pin B3, See NOTE *1 | | | POWER UNLOCK | WHITE (TYPE B) | @ BCM, PURPLE Plug, Pin B2, See NOTE *1 | | | LOCK MOTOR WIRE | GRAY (TYPE C) | @ DRIVERS DOOR Module, in Drivers Door | | | DOOR TRIGGER | See NOTE *3 | See NOTE *3 | 17044_H2_(-) NEGATIVE DOOR PIN ISOLATION CIRCUIT.pdf | | DOMELIGHT SUPERVISION | GRAY/BLACK (+) | @ BCM, BLACK Plug, Pin E, See NOTE *1 | | | TRUNK RELEASE | N/A | | | | SLIDING POWER DOOR | N/A | | | | HORN | BLACK / YELLOW to BLACK (-) | @ HORN Switch or BCM, GRAY Plug, Pin B9, See NOTE *1 | | | TACH | WHITE (1-6Volts AC) testing voltage | @ PCM, GREEN Plug, Pin 10, See NOTE *4 | | | WAIT TO START LIGHT | N/A | | | | BRAKE | WHITE (+) | @ Switch above BRAKE Pedal | | | FACTORY ALARM DISARM | LIGHT GREEN (-) | in DRIVERS DOOR at DOOR Module | | | ANTI-THEFT | GM'S New PASSLOCK II System, Requires XK06 Bypass Module | | |
| NOTES | NOTE *1 The BCM is located behind the HEADLIGHT Switch. The BCM has 6-Plugs, with the PURPLE Plug on the Back of the Module.
NOTE *2 This vehicle has 2 (+) Positive Parking Light wires, use both, requires 2 extra Relays Part 775 to connect See DIAGRAM
NOTE *3 the DRIVERS DOOR is a GRAY/BLACK (-) at the DRIVERS DOOR module in the DRIVERS DOOR. The PASSENGER DOOR is a BLACK/ WHITE (-) at the PASSENGERS DOOR module in the PASSENGERS DOOR. The DRIVERS REAR DOOR is a LIGHT BLUE/BLACK (-) Pin A3 and the PASSENGERS REAR DOOR is a LIGHT GREEN/ BLACK (-) Pin A2, both are located at the BCM, PURPLE plug. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM
NOTE *4 The PCM is located under the Hood of the vehicle, on the Drivers side next to the Battery. |
Posted By: uwDawson
Date Posted: September 27, 2007 at 2:06 PM
THanks!
|