08 subaru tribeca remote start wiring

Vehicle wiring request for the 2008 Subaru Tribeca.
Remote start application.
Thank you.

heres an 07, it's the same as 08. I crossed it with the Astrochart.

PASSIVE ANTI-THEFT	YES	TRANSPONDER	SEE NOTES
12 VOLTS	White	Ignition switch harness	+
IGNITION	Green	Ignition switch harness	+
IGNITION 2	Blue	Ignition switch harness	+
ACCESSORY	Yellow	Ignition switch harness	+
STARTER	WHITE/ black	Ignition switch harness	+
KEY SENSE	Red	Ignition switch harness	+
TACH SIGNAL	RED / white	In the larger plug behind the instrument cluster	AC
FUEL INJECTOR	Opposite from Yellow/blue	At any injector on engine	AC
LOCK	BROWN / white	At module on right of steering column	-
UNLOCK	BROWN / black	At module on right of steering column	-
DOORPIN	SEE NOTES
Blue/white (driver's door), Blue/orange (pass. Door.). Both wires are found at the module on the right side of the steering column.
TRUNK PIN	Yellow/blue	At module on right of steering column	-
TRUNK RELEASE	Yellow	At module on right of steering column	-
FACTORY ARM	With OEM remote only
FACTORY DISARM	With OEM remote only
BRAKESWITCH	BROWN / white	At switch above brake pedal	+
PARKLIGHTS	Orange	At light switch harness	+
HAND BRAKE	Gray	At switch on parbrake lever	-
HORN	RED / white	At module on right of steering column	-

The rear defroster can be triggered on a RED / blue at the relay box left of the column. It's a pos latched pulse.

I can also give you sunroof control info if you want ti!