2007 chevy 2500 hd remote start
Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98467
Printed Date: May 09, 2025 at 10:57 AM
Topic: 2007 chevy 2500 hd remote start
Posted By: thederf
Subject: 2007 chevy 2500 hd remote start
Date Posted: October 30, 2007 at 3:06 PM
Vehicle wiring request for a 2007 2500HD Chevy Silverado for a remote starter does not have power locks or windows. 6.0 Gas Engine
Thanks
Replies:
Posted By: KarTuneMan
Date Posted: October 31, 2007 at 1:11 AM
| PASSIVE ANTI-THEFT | YES | TRANSPONDER | SEE NOTES | | 12 VOLTS | RED / white (x3) | In black plug on BCM to left of steering column | + | | IGNITION | Pink | Ignition switch harness | + | | ACCESSORY | Yellow | Ignition switch harness | + | | STARTER | Pink/black (1290-ohms) | Ignition switch harness | mux | | | | Follow the provided diagram for correct wiring of the starter wire for remote start. |
| | TACH SIGNAL | Lt.green | In large harness on lower driver's side of engine | AC | | LOCK | Data interface module required | | | | UNLOCK | Data interface module required | | | | DOORPIN | Gray/black & Tan/white | In each front door at switch assembly | - | | HOODPIN | Pink/black | In black plug on BCM to left of steering column | - | | TRUNK PIN | Pink/black | In pink plug on BCM to left of steering column | - | | TRUNK RELEASE | Pink | In pink plug on BCM to left of steering column | - | | | | This is the rear window release |
| | FACTORY DISARM | Lt.green | On brown plug at switch assembly in driver's door | - | | BRAKESWITCH | Lt.blue | In pink plug on BCM to left of steering column | + | | | | Must test with ignition on. |
| | PARKLIGHTS (-) | Dk.blue | In brown plug on BCM to left of steering column | - | | HAND BRAKE | Lt.blue | In brown plug on BCM to left of steering column | | | HORN | Tan | In brown plug on BCM to left of steering column | - |
Posted By: thederf
Date Posted: October 31, 2007 at 8:45 AM
*Follow the provided diagram for correct wiring of the starter wire for remote start.*
What diagram are you referring to?
Thanks
Posted By: Velocity Motors
Date Posted: October 31, 2007 at 8:52 AM
instead of the module, use a proper bypass module that will do the MUX bypass for you. It's easier and alot less wires and less relays. We use the GMSL-2 from Fortin or the iDatalin ADS-TB.
*The ADS-TB can be used for the Classic or the New Body Style. *
What truck do you have ? Classic or New Body Style ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: thederf
Date Posted: October 31, 2007 at 9:32 AM
Ok, well I'm a little confused. I've never had to use a relay for the starter wire. It is the New body style. when you mentioned bypass module, first thing that came to mind is for the transponder Key, witch I do not have?
|