Print Page | Close Window

1999 GMC Yukon turn signal - brake light

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9919
Printed Date: April 28, 2024 at 2:19 PM


Topic: 1999 GMC Yukon turn signal - brake light

Posted By: Billz89
Subject: 1999 GMC Yukon turn signal - brake light
Date Posted: February 22, 2003 at 8:57 PM

Hello.

I am having a problem with my turn signals too, but not quite the same.  Here is what has transpired so far for my 99 GMC Yukon SLT:

1. Rear driver side turn signal stopped blinking
2. Front driver side turn signal blinks fast
3. Rear driver side brake light stopped working
4. Replaced all the bulbs in back
5. Re-seated turn signal relay
6. Unplugged trailer lighting hookup and restored stock connection

Still have the same problems.  I'm not sure it makes sense it is the turn signal relay, otherwise the brake light would work, correct?

I am having a problem with my turn signals too, but not quite the same.  Here is what has transpired so far for my 99 GMC Yukon SLT:

1. Rear driver side turn signal stopped blinking
2. Front driver side turn signal blinks fast
3. Rear driver side brake light stopped working
4. Replaced all the bulbs in back
5. Re-seated turn signal relay
6. Unplugged trailer lighting hookup and restored stock connection

Still have the same problems.  I'm not sure it makes sense it is the turn signal relay, otherwise the brake light would work, correct?

This has been going on for the past three weeks and when I change lanes I'd like the person behind me to see my turn signal.  ;)  

I appreciate the help.

Bill




Replies:

Posted By: Billz89
Date Posted: February 22, 2003 at 9:01 PM

Ouch, did I butcher that message!  I had originally intended it as a reply to an existing topic, but figured it best as a new topic.  I didn't realize I hit paste twice.  Pardon my mistakes.

Bill






Print Page | Close Window