2006 escape tach wire

Printed From: the12volt.com
Forum Name: Vehicle Wiring Information & File Requests
Forum Discription: Request Car Alarm, Car Stereo, Cruise Control, Remote Starter, Navigation, Mobile Video, and Other Vehicle Specific Wiring Info, Manuals, Tech Tips
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99877
Printed Date: November 03, 2025 at 6:56 PM

Topic: 2006 escape tach wire

Posted By: premier1974
Subject: 2006 escape tach wire
Date Posted: December 11, 2007 at 9:15 AM

I just want to be positive, but I can use any wire coming out of a coil pack as long as it's not red or WHITE/ red? I'm installing a prestige aps-687 is there anything I should know or be careful of?

Replies:

Posted By: NowYaKnow
Date Posted: December 11, 2007 at 8:39 PM

You don't want to use those coil packs the signal is not clean enough. You want the injector it will be a tan or something they are a pain to get at I just open up the harness near the engine pass firewall side and grab it there.

Posted By: premier1974
Date Posted: December 11, 2007 at 11:21 PM

tan? any other color?

Posted By: mikvot
Date Posted: December 12, 2007 at 6:42 PM

Each injector has 2 wires. 1 of the colors will be common to every injector. Use a wire that is colored different from the common wire. Doesn't matter which injector you use. Hope that makes sense.

-------------

Print Page | Close Window