kenwood dv3100 wiring

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=102982
Printed Date: June 26, 2025 at 5:46 AM

Topic: kenwood dv3100 wiring

Posted By: 84runner
Subject: kenwood dv3100 wiring
Date Posted: March 11, 2008 at 8:52 PM

I have a Kenwood KNA-DV3100 nav unit and when the unit was taken out of the last vehicle the "S.SENS" wire had the protection diode cut off. I am trying to install this into a 2006 Toyota Tundra and would like to know how this will affect my vehicle and if I can get a new harness and where. Thanks for all your help to a Newbie on the site.

Replies:

Posted By: 84runner
Date Posted: March 13, 2008 at 8:25 AM

Well I called and talked to Kenwood support about my issue and they told me that I need a 1 AMP Signal Diode to replace the diode that was cut off. so if anyone else has this problem then thats what you need according to Kenwoods tech support.

Print Page | Close Window