Print Page | Close Window

broke brain connector on avic n1

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103986
Printed Date: June 26, 2025 at 1:30 AM


Topic: broke brain connector on avic n1

Posted By: whiteram423
Subject: broke brain connector on avic n1
Date Posted: April 14, 2008 at 8:58 PM

I have a avic n1 head unit which the the plug in connector broke on the headunit. is there any way to fix this. i thought about soildering it but i cant get to the back piece of the unit and they are very small. what do you think i can do to fix this.




Replies:

Posted By: i am an idiot
Date Posted: April 14, 2008 at 9:21 PM

As you already stated, those connections are too small to solder.  Well of course unless you are a soldering Jedi.  A soldering Ninja is nowhere near capable enough to pull that off.




Posted By: DYohn
Date Posted: April 14, 2008 at 9:56 PM
i am an idiot wrote:

As you already stated, those connections are too small to solder.  Well of course unless you are a soldering Jedi.  A soldering Ninja is nowhere near capable enough to pull that off.

Classic!!  posted_image



-------------
Support the12volt.com



Posted By: chillin420
Date Posted: April 15, 2008 at 6:25 PM
lol you should be able to buy yourself a replacement harness from pioneer

-------------
you can do it....
advanced MECP, lol does it really matter....
patience is a virtue



Posted By: i am an idiot
Date Posted: April 15, 2008 at 6:29 PM
His harness is fine, the plug that is soldered to the circuit board has broke off of the board.


Print Page | Close Window