pac tr 7 with alpine iva 106 bypass
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105725
Printed Date: May 23, 2024 at 1:30 PM
Topic: pac tr 7 with alpine iva 106 bypass
Posted By: jmduner
Subject: pac tr 7 with alpine iva 106 bypass
Date Posted: June 26, 2008 at 10:51 PM
I just got the Alpine iva-d106 in the mail today along with the PAC tr-7 and i installed the receiver along with the tr-7 the way the tr-7 directions showed to bypass the video and it didn't seem to work correctly. can somebody give me some suggestions as to what I'm doing wrong?
Replies:
Posted By: knockn4life
Date Posted: June 29, 2008 at 12:22 AM
i have the iva-d900 and i installed the pac tr-7 and it works fine. did you pulse the ground wire 3 times and turn the switch to off on the pac tr-7 after? this part kind of confused me on my install
-------------
2001 dakota r/t 1 15"RF HX2
1 1000BD power amp 1 1 farad cap 4 channel amp
Posted By: jmduner
Date Posted: June 29, 2008 at 2:11 PM
No i didnt. that could be my problem. i thought the tr-7 was pre-programmed for the alpine bypass. ill give that a try and see what happens. thanks for the advice.
|