yukon amp bypass
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105815
Printed Date: May 12, 2024 at 5:56 PM
Topic: yukon amp bypass
Posted By: hmfox524
Subject: yukon amp bypass
Date Posted: June 30, 2008 at 9:39 PM
on an 03 gmc yukon XL the factory amp is fried, oem radio will no longer work because of it. new radio is going in but i also need to bypass the amp so the speakers will run solely off the new radio's built-in amplifier. Any ideas on an easier way to do this than running all new speaker wire from each bose speaker up to the radio?
-------------
heather marie
Replies:
Posted By: spookiestylez
Date Posted: June 30, 2008 at 10:01 PM
The Bose factory amp is right behind the glove box.
Easiest way to do this is to run some 9 wire (or some speaker wire)
from the radio to this amp. All the wires are factory colors and are
Front left:
Tan(+)
Grey(-)
Front Right:
light green(+)
dark green(-)
Rear Left:
brown(+)
yellow(-)
Rear Right:
dark blue(+)
light blue(-)
If you need more help let us know, or feel free to pm me and I'll try to help you out more. Welcome to the12volt.com
-------------
RTFM
Posted By: hmfox524
Date Posted: July 02, 2008 at 6:26 PM
thanks so much for the help...turned what i thought would be a 2 hour or more install only took half an hour and it worked great. Thanks again!
-------------
heather marie
Posted By: spookiestylez
Date Posted: July 02, 2008 at 9:23 PM
its no problem. I'm really glad I could help and that something I said was useful, lol.
-------------
RTFM
|