need pinouts for audiovox vod705

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106071
Printed Date: May 11, 2025 at 11:48 PM

Topic: need pinouts for audiovox vod705

Posted By: electech1
Subject: need pinouts for audiovox vod705
Date Posted: July 12, 2008 at 8:56 AM

I have an Audiovox VOD705K, came out of a 2004 Kia Sedona.

No wiring harness. The unit has 2 connectors an 18 pin and an 8 pin. The 8 pin is for the FM modulator which I don't need.

I only need to find the +12 and ground on the 18 pin connector so I can hook up the power. I am just trying to test the unit right now for power and playback, before I try and install.

Anyone have the pinouts or wiring schematic for the unit itself. I have the installation manual but it just shows the harness hooked to the unit and does not show where the individual wires go.

Thanks

Replies:

Posted By: DYohn
Date Posted: July 12, 2008 at 10:51 AM

What happened to the wiring harness?

-------------
Support the12volt.com

Posted By: electech1
Date Posted: July 12, 2008 at 1:08 PM

I received this without any harness. The owner bought a bigger unit and used the harness. And I don't have access to him or his van to take a look.

I called Kia and they won't help since the Kia I am putting it it did not come with it. Kia asked for my VIN and told me my van did not have a DVD player, and that was that with them. I do have an email into Audiovox, they did sell generic wiring connectors with this model. But so far they can't locate one they can sell. They have not responed to a request for the pinouts.

Right now I just want to hook up 12 volts to make sure it works ok before going to all the trouble of installing it.