Delco factory DVD Video Out

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10636
Printed Date: August 20, 2025 at 7:09 PM

Topic: Delco factory DVD Video Out

Posted By: alamojoe
Subject: Delco factory DVD Video Out
Date Posted: March 09, 2003 at 10:12 AM

I have an Expedition with a factory installed Delco DVD. Does anyone how how to get video out on the unit? I want to be able to run a second monitor off of it. Looking at the unit, it will probably be an interesting hack but I am up to it. Thanks.

Replies:

Posted By: esmith69
Date Posted: March 13, 2003 at 9:13 PM

I doubt it's even possible without taking the whole thing apart and probably soldering stuff on. Even then I don't even know if you could do it. Of course, first thing I would do is start at the dvd source, then look for the wire/cable/connection that goes to the monitor. Once you find that if you can figure out what kind of connection and/or cable it is, we might be able to give you some more ideas. I've never tried this myself but of course theoretically it could be done... posted_image

Posted By: audiomechanic
Date Posted: March 22, 2003 at 8:32 PM

a lot of thime the video signal in the factory units are way to strong for the after market units.....you might have to knock the signal down. if it is a 2003 whitch it probably is .....the over head just pops right down.....from what i remember it isnt screwed up there...must be nice to be able to engineer it into the car from the start!!!!!

-------------

Print Page | Close Window