OK a friend of mine has bought a touch screen DVD player. ( unfortunately from eBay ) As you my already know you almost never get all the hardware with your merchandise. An it has no power from the preouts. An i can not get him to let me replace the mosfit. It could also be the processor that has gone out on it to i thank. I'm not sure. So the easiest thing i know to do is to hard wire the RCA's to the unit. What I'm looking for is to see a picture of the RCA plug that somebody has taken or a diagram of the RCA plug. Ive searched pioneer web site an had no luck an cant find a picture that shows it good. Id rather hard wire it to the back of the radio for him then try to hunt the plug down to the plug for the unit an pay $40. to $50. bucks for it! I guess I could tare down the unit an trace the RCA circuitry but i was hoping for an easier answer. If you can help me with this dilemma thanks
-------------
got to be loud!!!!!
One row of the pins are all connected to each other. This row of pins is for the shields of the RCA jacks. The pin above or below it is the signal wire. You may have to get the amps in the car, solder the shields and touch the center conductor to the pins and balance and fade to figure it out.
| CDE7194 | CORD, RCA OUTPUT | IN STOCK | $32.09 |
Pacific Coast Parts pacparts.com 1-800-421-5080
thanks!!! i thank i have it now. you wouldn't know where to find a power supply for the clarion dxz745mp would you an the plug? If you have them id like to buy them from you i love that radio an i killed it when i switched trucks last year.
-------------
got to be loud!!!!!