avic d1 256volt problem
Printed From: the12volt.comForum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=109099
Printed Date: May 12, 2025 at 5:45 PM
Topic: avic d1 256volt problem
Posted By: mikednepr
Subject: avic d1 256volt problem
Date Posted: November 20, 2008 at 9:00 PM
Hello all. I have AVIC D1 installed into 1998 Nissan Maxima. The unit was bought second hand.
After the installation I noticed following problems: The sistem is showing power voltage as 256 Volts in the system status as well as in test mode service menu. Also, the system does not see any speed sensor pulse, and last, the system never gives out voice commands.
Having these problems does not affect the navigation in general. I can enter the destination and use the navigation to get where I need.
Also any of the A/V functions are not affected.
If anybody has an idea of what is wrong with my AVIC I would greatly appriciate your help.
Thank you for your time reading this post!
Replies:
Posted By: hcbrf3
Date Posted: November 21, 2008 at 9:36 AM