2000 honda accord vss problem
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110332
Printed Date: April 27, 2024 at 5:33 AM
Topic: 2000 honda accord vss problem
Posted By: SoundFX411
Subject: 2000 honda accord vss problem
Date Posted: January 04, 2009 at 12:53 PM
I'm installing an Alpine Nav system in this car and the diagram sheet says the VSS wire is Blue/White wire found at the ECM 1st plug. My problem is there is no Blue/White wire there. How can I test for this wire?
-------------
SoundFX
Replies:
Posted By: djfearny2
Date Posted: January 04, 2009 at 1:10 PM
they usually will not deviate on color completely. so if it says blue white try some of the solid blues. most plugs dont have more than three. than drive the car forward about ten feet while monitoring speed pulse in the settings menu. if its wrong try another. also behind the cluster should be another speed sence wire possible same color.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Posted By: Mike M2
Date Posted: January 04, 2009 at 5:25 PM
According to Avox, it is the gray 32 pin plug, pin #3, blue white. IKf there is no wire there, try stripping one back and shoving it into the hole, then check with a DVM...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: xplorin16
Date Posted: January 05, 2009 at 1:18 AM
Meters are your friend. Check for voltage fluctuation or pulses as the wheels turn.
-------------
Advanced MECP
Posted By: SoundFX411
Date Posted: January 05, 2009 at 5:29 PM
Thank You for your answers. It wound up being the last plug at the ecm which was a white 32 pin plug. The first plug is where you will find the blue/white wire for the v6 model
-------------
SoundFX
|