Print Page | Close Window

2000 olds bravada avic f90bt

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113022
Printed Date: May 02, 2024 at 4:10 PM


Topic: 2000 olds bravada avic f90bt

Posted By: ta6point6litre
Subject: 2000 olds bravada avic f90bt
Date Posted: April 09, 2009 at 9:28 PM

I am installing an AVIC-F90BT in my 2000 Bravada. There are only 2 wires I have not connected yet. The first is the (PINK) Vehicle Speed Signal Input wire. The second is the (VIOLET/WHITE) Reverse Signal Input wire. I need to know specifically where is the best place to connect these wires. I don't want to run the Reverse wire all the way to the tail light. I have the center console shifter so I would assume that there should be a wire I can tap there for reverse. Please, any help would be appreciated. Thanks.



Replies:

Posted By: i am an idiot
Date Posted: April 09, 2009 at 9:34 PM
posted_imageSpeed SensePPL/WHITE(+)RIGHT SIDE OF ENGINE COMPARTMENT AT VCM
posted_imageParking LightsBLUE(+)LIGHT SWITCH HARNESS
posted_imageBrake LightsWHITE(+)BRAKE SWITCH
posted_imageReverse LightsGRAY(+)SWITCH ON TRANSMISSION


Print Page | Close Window