alpine tme m580

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114135
Printed Date: May 17, 2024 at 4:34 PM

Topic: alpine tme m580

Posted By: corsair944
Subject: alpine tme m580
Date Posted: May 31, 2009 at 6:29 PM

HI,

I just picked up a pair of TME-M580's with headrest kits. Ive been reading how Alpine uses p/brake and e/ brake to allow video only stopped. Since Im installing in rear headrest I have been reading how to omit this wiring so the kids can watch Sponge Bob as we cruise down the road. I saw on a similar post to pin the #2 wire slot and ground it. My question is: Do i just leave the p&e/brake wires unattached. Or do I need to run a Pac7 relay.

Thanks in advance

Replies:

Posted By: gcars
Date Posted: June 09, 2009 at 5:03 PM

Not sure if you figured it out already, but I need your help too..lol... I ran the relay on mine and followed the wiring diagram that came with the unit to bypass for "rear seat" viewing.

However, I just had one crack and am in need of replacing it. Can you tell me where you git yours from cuz everywhere I look it says they are discontinued :(

Print Page | Close Window