Print Page | Close Window

2006 xl 7 factory radio takeout

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116101
Printed Date: May 14, 2025 at 10:51 AM


Topic: 2006 xl 7 factory radio takeout

Posted By: twank27
Subject: 2006 xl 7 factory radio takeout
Date Posted: September 04, 2009 at 2:48 PM

do any body know how to take the factory radio out of a 2006 XL7 I HAVE IT OUT ABOUT 2 INCHES AND THAT THE FAR IT WILL COME OUT CAN ANYONE HELP ME OUT PLEASE. THANKS SORRY ABOUT ALL CAPS 

-------------
IF U CAN'T CRANK IT YANK IT SUNNYSIDE.TX



Replies:

Posted By: tommy...
Date Posted: September 05, 2009 at 12:20 AM

This is for an 07...  Hope it helps...I cant get the pics ...so heres the link...

https://documents.victorytechnologies.com//documents/product/8581.pdf

1...Disconnect the negative battery terminal

to prevent an accidental short circuit.

2...

Press in on sides of the shifter boot to

release it from the shifter trim panel.

3...

Lift the boot up to access the Allen

screw securing the shifter knob to the

shifter lever. Loosen the Allen screw

and remove the shifter knob.

4...

Remove (1) torx screw from the shifter

trim panel , then using a

panel removal tool unsnap the shifter

trim panel. Unplug and remove the

panel.

5...

Using a panel removal tool unsnap

the radio trim panel. Unplug and

remove the panel.

6...

Remove (4) 9/32” screws securing

the radio. Unplug and remove the

radio.



-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!


Print Page | Close Window