how to connect lcd headrest to end unit

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=119991
Printed Date: April 28, 2024 at 2:09 PM

Topic: how to connect lcd headrest to end unit

Posted By: limit
Subject: how to connect lcd headrest to end unit
Date Posted: February 08, 2010 at 10:38 PM

I have installed 2 lcd monitors in my headreset and I am not sure how to connect them to the deck, the deck has a componet female connector out and the both lcd monitors from the headrest also have a female componet connector. How would I connect both the lcd monitors to my end unit?

Thanks in advance

Replies:

Posted By: ceasar326
Date Posted: February 09, 2010 at 12:00 AM

Depending on the inputs or outputs of your dvd headunit and heatrest, you will need an rca splitter to connect both LCD's to your dvd headunit. Also depending on the brand LCD's, most LCD's will require a video-amp. Thats for a better clear picture. If your LCD's are equipt with audio input i would also connect both togethere with RCA splitters.

Hope this help.

Posted By: bholt18
Date Posted: May 01, 2010 at 5:22 PM

What if the monitor has only sv connector

-------------
97 Yukon lvmshvd

Print Page | Close Window