Print Page | Close Window

connecting unit to speakers

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121431
Printed Date: May 14, 2025 at 10:26 AM


Topic: connecting unit to speakers

Posted By: mrred
Subject: connecting unit to speakers
Date Posted: April 20, 2010 at 5:03 AM

Hey guys im new here need some help. I have a Pioneer AVIC-F500BT that i am going to use as a navigation/video system. I have a Pioneer Head unit DEH-P4000. I also have a 4-channel amplifier with Mids and Tweeters connected.

My question is how can I connect the AVIC unit to my speakers so I get sounds from them.  The unit does not have a audio input.  I want to play music from the unit as well as get talk on the phone and watch video.

Pioneer sells a Aplifier Unit ND-G500 that goes with this AVIC unit but it can only be used with stock stereo speaker wires.  But I have RCA's so I dont know if that will work. Is there any way to hook them up directly to my speaker wires that go to my amp? Or any other way?




Replies:

Posted By: Velocity Motors
Date Posted: April 21, 2010 at 7:17 AM
Does the P4000 have an IPBUS connector on the back ? I'm sure you can use the CD-RB10

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: mrred
Date Posted: April 21, 2010 at 6:42 PM
Thanks a lot Jeff that was a lot of help didnt know such an adaptor existed.


Print Page | Close Window