avic x910bt, 2008 vw rabbit

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=121953
Printed Date: May 21, 2024 at 5:14 AM

Topic: avic x910bt, 2008 vw rabbit

Posted By: hcsauto
Subject: avic x910bt, 2008 vw rabbit
Date Posted: May 22, 2010 at 2:27 PM

I have a 2008 VW Rabbit. I am installing a Pioneer Avic-X910BT. I would like to know the colors of the the Speed input wire, Reverse light wire and the Parking brake wire. Your assistance is greatly appreciated.

Replies:

Posted By: topperz7
Date Posted: May 24, 2010 at 1:48 AM

Speed sense is a BROWN wire locate at the ABS MODULE under your hood

Reverse light wire is BLACK /w BLUE stripe in driver kick panel harness to rear of car can also be found at the fuse box under your dash or all else fails at your reverse light bulb. You only need this wire if you are hooking up reverse camera otherwise forget about it

Your Parking brake wire is BROWN / w YELLOW stripe at the base of your parking brake

Posted By: hcsauto
Date Posted: May 24, 2010 at 6:57 AM

Thanks. I will give you a call today about the parking brake solution.

Print Page | Close Window