i need schematics for veba 7 dvd player

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126095
Printed Date: May 11, 2025 at 8:19 PM

Topic: i need schematics for veba 7 dvd player

Posted By: groovejet
Subject: i need schematics for veba 7 dvd player
Date Posted: February 09, 2011 at 11:48 PM

Ive got a few problems with my Veba 7" tft dvd monitor.
Cant find model no. but i know the unit is discontinued.
Its the roof mounted model.
I have the serial no- 0422380566

I need wiring diagrams for the units circuit itself/or simply just the diagram for the associated wire connections .

Also has anyone got info on wiring up from start to fin, i.e from the power supply to the wiring of all associated controls?
thankyou

Replies:

Posted By: i am an idiot
Date Posted: February 10, 2011 at 12:48 PM

How many wires are there? What colors are they? Are there any RCA connectors?

Posted By: groovejet
Date Posted: February 10, 2011 at 8:45 PM

Hope these pics help.
As you can see, some connections have been snipped on pcb-

From left to right-
Bk-Grd
R-R1
Wh-L1
Bk-Grd
Y-V1

Wh- L Out
R- R Out
Bk-coo
Y-V Out
Bk-Grd (Missing wire? Connection broke?

The black Female jacks in image have never been previously used.
The 4 wires Wh, Y, R, Bk were connected into chock block and pushed out of sight in roof panel.

I appreciate your interest, cheers posted_image

Posted By: groovejet
Date Posted: February 10, 2011 at 8:50 PM

Can you see the images? Because i cant?

I'll upload them again if you cant see them, ok

posted_image

Posted By: groovejet
Date Posted: February 10, 2011 at 9:08 PM

The images not showing! Is it something to do with File Extensions?
What do i do?

Posted By: groovejet
Date Posted: February 28, 2011 at 12:12 AM

been 18 days since last post!!! not much help out there, is there???

Posted By: i am an idiot
Date Posted: February 28, 2011 at 10:25 PM

Last time I checked, I could not see the images. I guess I should have read what you typed. R-R1 = right channel audio. WH-L1 = left channel audio Yellow = Video

Same wire colors for the outputs as well. Red = Right, White = left Yellow = Video.

All wires labeled GND are common with each other and ground for the device.

Posted By: groovejet
Date Posted: March 03, 2011 at 4:05 PM

Thankyou "im a idiot"