2000 silhouette vhs integration
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126607
Printed Date: May 10, 2025 at 10:47 AM
Topic: 2000 silhouette vhs integration
Posted By: pts760
Subject: 2000 silhouette vhs integration
Date Posted: March 17, 2011 at 12:26 PM
Here's what I got.
I had a customer come in the other day with a factory VHS unit with a overhead TV. The customer wants to replace the VHS with a DVD player. I'm bringing the car into the shop tomorrow to tear it apart & see what I have to work with but I just wanted to get a heads up on this vehicle if I could. As of now, I was thinking about adding a 12v dvd player in place of the factory VHS player but my question is can I integrate with the factory wiring by soldering in a A/V cable in with the factory harness? Or, would I be more inclined to run my own rca's to the AUX input on the factory screen. I would rather not go this route cause I would like to keep the install as clean as possible. If I can integrate with the factory wiring does anyone have info on the factory wiring. Also is there any other parts that I may need.
Thanks for your support! You guys are awsome!
-------------
I drink current, eat ohms, and bleed voltage
Replies:
Posted By: lspker
Date Posted: March 20, 2011 at 10:55 PM
Did that before, just tie in the factory. Don't remember the pin out........think I opend the vhs and followed the board.
|