head rest monitors

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12742
Printed Date: July 12, 2025 at 3:23 PM

Topic: head rest monitors

Posted By: brianh
Subject: head rest monitors
Date Posted: April 25, 2003 at 3:34 PM

Does anyone know the neatest way to run the cable through the back of the seat and out of the seat where the post from the head rest runs into the seat? How do you remove the plastic housing around that hole to pull the cable through with out cutting the seat fabric? Any tips or ideas you can share are appreciated. Thanks in advance. Brian

Replies:

Posted By: dkeenan
Date Posted: April 27, 2003 at 12:35 PM

Check out the headrest installation article above!

Posted By: Velocity Motors
Date Posted: April 27, 2003 at 4:17 PM

https://www.velocitymotorsport.com/install_notes/step_by_step.htm

What you can do for the cable between the monitor and the source unit is to use a gromet plug and wedge it into the seat just below the headrest. Pass the wire through the gromet and it's clean and looks great.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: brianh
Date Posted: May 04, 2003 at 6:37 AM

Thanks for the tip. I have got them in and fishing the seat was no problem. Just getting the little harness under the fabric at the post hole was a fit but patients paid off. The wire doesnt look that bad but I sure wish the post was a hollow one. Thanks for all of your help. Brian

Posted By: Velocity Motors
Date Posted: May 04, 2003 at 10:00 PM

No problemo. Can you please post some pics when you have time ? I'd like to see your finished project

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window