please help!

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13050
Printed Date: May 14, 2024 at 10:36 AM

Topic: please help!

Posted By: joey12volt
Subject: please help!
Date Posted: May 01, 2003 at 9:56 PM

i bought the cable for the cva 1000 video input.. now i get the navigation screen and only see video for a second when i press v. sel. what am i doing wrong?? i grounded the ebrake wire. what else!??!!?!?!??!!?!?

Replies:

Posted By: Velocity Motors
Date Posted: May 01, 2003 at 10:12 PM

Did you go through the proper sequence of the hand brake/e-brake ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: joey12volt
Date Posted: May 03, 2003 at 10:42 PM

i am trying to bypass the ebrake circuit..

do you know if the 1000 and the 1005 have the same way of bypassing the ebrake? i have a demo board chip for the 1005 and i would like to know if it would work for the 1000.

i guess my biggest problem is that i see video for a second then it goes to navigation system not connected...

thanks!

Posted By: Velocity Motors
Date Posted: May 04, 2003 at 9:47 PM

The 1000 did not have the video output that the 1005 has. As far as I know the 1000 was not meant for video input unless you modified the M-bus cable to support the video signal.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window