06 f250 factory b/u camera to 4400bh

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132684
Printed Date: May 06, 2025 at 1:29 AM

Topic: 06 f250 factory b/u camera to 4400bh

Posted By: robd007
Subject: 06 f250 factory b/u camera to 4400bh
Date Posted: November 15, 2012 at 9:47 PM

Is there a way to connect the factory backup camera to a pioneer avh-p4400bh?

Thanks in advance

Replies:

Posted By: i am an idiot
Date Posted: November 15, 2012 at 11:07 PM

There will be either 3 of 4 wires coming from the factory camera. One will be 12 volts when the vehicle is placed in reverse. Another will be video signal. There will be either 1 or 2 grounds. If 2, they are common and it does not matter which you use for power ground or video ground. Cut this cable and splice accordingly.

Print Page | Close Window