Print Page | Close Window

2014 tundra oem backup cam issue

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136613
Printed Date: May 05, 2025 at 10:26 AM


Topic: 2014 tundra oem backup cam issue

Posted By: desh187
Subject: 2014 tundra oem backup cam issue
Date Posted: May 09, 2014 at 2:29 PM

Installed a JVC DDin Nav unit to a 2014 Toyota Tundra with stock backup camera.
Stock camera works on 6volts power supply so i used a voltage regulator 7906 to the 24 pin camera connector which has black-cam power,gray-cam ground,red- Positive video signal and white negative signal all color taken from vehicle schematics
I still cannot get stock camera to turn on.Aftermarket camera works fine and stock camera comes on with stock deck.Customer wants stock camera to work.
Any ideas will be very much appreciated.Thanks



Replies:

Posted By: desh187
Date Posted: July 04, 2014 at 11:42 PM
Issue resolved,Black cam power wire gets power from reverse wire which turns on the oem camera.


Print Page | Close Window