alpine iva-c800 video bypass
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13701
Printed Date: May 06, 2025 at 9:54 PM
Topic: alpine iva-c800 video bypass
Posted By: alanleary
Subject: alpine iva-c800 video bypass
Date Posted: May 19, 2003 at 10:39 AM
how do you bypass the warning screen on alpine hus... I want to watch video while driving?
-------------
dogsalan1
Replies:
Posted By: auex
Date Posted: May 19, 2003 at 4:54 PM
you could just hit the e-brake to one notch and it shouldn't have any effect on the wheels, or you would need to wire in a momentary switch to act as the brake wire and a toggle switch to act as the e-brake.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Sagrox2000
Date Posted: May 20, 2003 at 12:02 AM
Follow the same sequence to unlock the video as you would when the vehicle is sitting still, but put the wires to 12 volt.
Get a true 12 Volt Wire and strip a small segment of the wire off, take the foot brake wire from the brain and the e-brake wire from the brain and follow this sequence.
Touch the foot brake wire to 12 volt and hold it there, now touch and hold the e-brake wire to the same 12 volt wire, now remove the foot brake wire, now just keep the e-brake wire attached to the 12 volt wire and your video should stay enabled.
|