Print Page | Close Window

Autodimming Mirror/Diode Usage

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139708
Printed Date: April 19, 2024 at 11:07 AM


Topic: Autodimming Mirror/Diode Usage

Posted By: quantumfluxx
Subject: Autodimming Mirror/Diode Usage
Date Posted: November 11, 2015 at 11:36 AM

I have a Gentex auto-dimming rear view mirror that has a 5 pin input on the backside of the mirror. One of the pins disables the auto-dimming functionality when power is supplied to it. The pin was designed to be connected to the vehicle's backup lights or another wire that would have power [only] when the transmission is in reverse. Achieving this would seem to be simple enough, but I would also like the auto-dimming feature to 'pause' when the vehicle's dome light is lit. I am still a beginner when it comes to electronics, but I believe I have devised a solution. Any insight into this would be much appreciated. Thanks :)

posted_image



Replies:

Posted By: i am an idiot
Date Posted: November 11, 2015 at 4:00 PM
Chances are your domelight system is exactly opposite of what you posted. Make Model and Year of the vehicle in question?



Posted By: quantumfluxx
Date Posted: November 11, 2015 at 10:12 PM
2000 Honda Accord 4 Door SE

Here is the wiring diagram for the dome light:
https://drive.google.com/file/d/0B_BudsUOt_srT3B4X0IyYVNoZlU/view?usp=sharing


Print Page | Close Window