Print Page | Close Window

Installing monitor for dashcam

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142203
Printed Date: May 02, 2025 at 9:49 PM


Topic: Installing monitor for dashcam

Posted By: nidish
Subject: Installing monitor for dashcam
Date Posted: December 09, 2016 at 6:34 AM

Hey guys, I bought a monitor for my dashcam since it does not have a built in monitor.

It's a cheap 4.7 inch monitor from ebay that I'm going to connect to the dashcam. The monitor has a wire for power and one for ground. For the power wire, should i connect it to 12v constant, acc or ignition? I don't want it to drain my battery. I'm going to connect it to the stereo harness. Thanks



Replies:

Posted By: nidish
Date Posted: December 12, 2016 at 8:26 AM
No one can help?



Posted By: the12volt
Date Posted: December 12, 2016 at 9:17 AM
Connect it to accessory.

BTW, this topic has been moved to the mobile video forum.

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window