Print Page | Close Window

need help installing Pyle indash.

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14609
Printed Date: July 27, 2025 at 11:40 PM


Topic: need help installing Pyle indash.

Posted By: Loadin_blitzzz
Subject: need help installing Pyle indash.
Date Posted: June 08, 2003 at 10:56 AM

I got a pyle dvd player and indash screen.  I drive a 98 prelude.  I have a panasonic deck in there as well.  so i shared the powere with the deck harness. 

all the speaker wires are straight forward.  but there is  3 wires which connect to a fuse that is connected to the main box.  

they are

yellow( B+ batter), red(ignition)<--- can this be connected to the red with the deck harness? black ground.

power antenna as well.  i've connected these to all the right spot. except the red i did not use the ignition wire.

is there a method i should use in order to share power in one harness??all i did was wire them together.. should i splice them? 

does anyone have a DIY on this.. or could help me out.. thanks.




Replies:

Posted By: mde32006
Date Posted: June 10, 2003 at 5:21 PM
which model dvd player did you buy? pyle makes several.

-------------
Greet every day positively, for each day is a blessing


Print Page | Close Window