Weak Reverse Signal or Bad Stereo?
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146358
Printed Date: April 26, 2024 at 9:08 PM
Topic: Weak Reverse Signal or Bad Stereo?
Posted By: raydawg357
Subject: Weak Reverse Signal or Bad Stereo?
Date Posted: July 25, 2020 at 6:13 PM
The backup camera on my Pioneer avh-2330nex will come on and shut off. It will not power up when the camera button is pressed on the unit. Could this be a weak signal or a bad stereo?
-------------
Do it right the first time
Replies:
Posted By: i am an idiot
Date Posted: July 26, 2020 at 12:03 PM
Did you connect the camera power wire to switched 12 volts or did you connect it to reverse wire? In order to use camera view from the deck, you must power the camera via Ignition or accessory.
Posted By: raydawg357
Date Posted: July 26, 2020 at 2:38 PM
it's only connected to the reverse power. So I need to connect the accessory wire to it also? Won't that keep the camera powered at all times?
-------------
Do it right the first time
Posted By: i am an idiot
Date Posted: July 26, 2020 at 6:08 PM
The camera needs power to work. If you want to be able to use the camera view feature of the radio you will need to power it. It will be on the entire time the ignition is powered. If you do not want this situation you may have to use a switch of some sort to power it when you want to use camera view.
|