2007 Cadillac Escalade, No Start After Accessory Install

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146834
Printed Date: May 02, 2025 at 11:35 AM

Topic: 2007 Cadillac Escalade, No Start After Accessory Install

Posted By: w8lifter21
Subject: 2007 Cadillac Escalade, No Start After Accessory Install
Date Posted: May 01, 2021 at 5:47 PM

Hooked up a turn on wire for two 7" headrest monitors that draw about 10A combined to the key accessory wire, now it won't start. Checked an alternate wire guide and it notes that this location should not be used for accessory installations. Starting to go through the fuses, but does anyone know if something like the BCM could/would have been damaged?

-------------
Refined Performance Motorsports

Replies:

Posted By: Ween
Date Posted: May 01, 2021 at 8:44 PM

Check fuse #34 underhood. it's a 2 amp fuse, probably blown. BCM is should be ok.

Posted By: w8lifter21
Date Posted: May 01, 2021 at 9:11 PM

Winner winner chicken dinner, spot on!

-------------
Refined Performance Motorsports

Print Page | Close Window