Floor Mount DVD
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15027
Printed Date: August 14, 2025 at 8:49 PM
Topic: Floor Mount DVD
Posted By: DjIQ
Subject: Floor Mount DVD
Date Posted: June 16, 2003 at 11:02 AM
Whats the best method for mounting accessories in the floor? what kind of screws to use? should i jack up the car and bolt the screws underneath?
Replies:
Posted By: Powerslave0
Date Posted: June 18, 2003 at 1:29 PM
Floor bolting is ok, just be prepared for skips and all that when you hit bumps.
Usually, just drill the holes through the floor, and use METAL screws. I mount CD changers this way, I mounted an AMP and CD changer on my rear seats in the trunk, just drilled through the metal, and screwed them in, no problems.
I had a GEO TRACKER, I just pulled the seat out, mounted the changer, drilled the holes though at the brackets, screwed it down, put the seat back in. . .
|