Print Page | Close Window

Position Of Speed Detection Circuit in A 97 Ram

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1612
Printed Date: April 29, 2024 at 9:55 PM


Topic: Position Of Speed Detection Circuit in A 97 Ram

Posted By: whcollier
Subject: Position Of Speed Detection Circuit in A 97 Ram
Date Posted: June 30, 2002 at 9:21 AM

Does Anyone know the location and color of the wire for the SPEED DETECTION CIRCUIT in a 1997 Dodge Ram 1500 Extended Cab Truck? I just installed the Pioneer AVIC-9DVD navigation system in my truck along with a AVX-P7300 and AVM-P800R and the only wire I cannot figure out is the wire for the speed control circuit to finish the installation any help or information would be greatly apreciated

Thanks

Bill



-------------
Just another Gadget Junkie



Replies:

Posted By: Velocity Motors
Date Posted: June 30, 2002 at 9:53 AM
VSS LeadWHITE/ Orange 3 Pin Connector Trans or PCM right SD Dash POS47 


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: whcollier
Date Posted: June 30, 2002 at 10:47 AM

thanks jeff but I am kind of new at this so some of the acrronyms you guys use kind of throw me what does (3 Pin Connector Trans or PCM right SD Dash POS47 ) POS47? andTrans or PCM? and also is right side of dash drivers side or passenger side? thanks again I think I have it located from what you just told me but need laymens terms so I am positive and dont blow out my new $1800.00 nav unit

Thanks



-------------
Just another Gadget Junkie




Posted By: Velocity Motors
Date Posted: June 30, 2002 at 10:17 PM

The VSS ( is the vehicle speed sensor lead ) and the 3 pin connector at the transmission or the PCM ( power Control module ) on the passenger side under the dash. POS47 is a piece of sh*t 47 ( just kidding ) I'm not sure what the POS47 is supposed to be fore, but you should be able to find this wire at one of the two locations.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: whcollier
Date Posted: July 01, 2002 at 7:58 AM

got it.....thanks

Bill



-------------
Just another Gadget Junkie




Posted By: Philo
Date Posted: October 09, 2002 at 11:50 AM
pos47 means Position 47. The plug is normaly numbered, and this means pin 47 in the plug

-------------
17 years in the 12 volt industry MECP 1st Class





Print Page | Close Window