Print Page | Close Window

Adding EQ to Alpine C-801

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16155
Printed Date: October 31, 2024 at 5:48 PM


Topic: Adding EQ to Alpine C-801

Posted By: willb
Subject: Adding EQ to Alpine C-801
Date Posted: July 10, 2003 at 11:45 PM

I've installed the alpine IVA-C801 and would like to add the kenwood KGC-6042A  EQ to it.  How do i go about accomplishing this?  Do I need a special adapter and if so where can I get it.  There is an option to add an Alpine EQ with the AiNet function, however I cannot find one that i can afford and since i already owned the kenwood EQ, i would like to make use of it.

  Any suggestion or recommendations?

   THank you

   Will 




Replies:

Posted By: Velocity Motors
Date Posted: July 11, 2003 at 12:17 AM
The Kenwood has dual inputs and outputs. Use the IVA front & rear outputs and plug them into the Kenwood's inputs. Use the outputs of the Kenwood to the respective amplifiers.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: willb
Date Posted: July 28, 2003 at 1:20 AM

went away on vacation.  Now that i am backed tried your suggestion and followed instructions to the dot but was unsuccessful.   would you happen to have another suggestion.  It will be greatly appreciated.  thank you

   will






Print Page | Close Window