Boss 10.4" flip down video distortion
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22310
Printed Date: July 23, 2025 at 7:28 PM
Topic: Boss 10.4" flip down video distortion
Posted By: gregfocker77521
Subject: Boss 10.4" flip down video distortion
Date Posted: December 03, 2003 at 10:59 PM
I recently had a Boss 10.4" flip down installed but I get some video distrotion. I can see some lines and they are more visable when I turn the truck on. Is there any thing I can do to fix this problem? Would a video amp help? The screen is a TFT but not impressed with it.
Replies:
Posted By: sparkie
Date Posted: December 04, 2003 at 9:34 PM
You must determine if the problem is from your video source, video signal cable, grounds or screen is the cause. Try new cables first as it is the easiest thing to do. Make sure your grounds for the screen and video source are to a paint free, clean part of the vehicle's chassis. Try a different video source if you can get your hands on one. Also check to see if any components or wires pass close to any electric motors in the vehicle.
-------------
sparky
|