Back Up VIdeo Camera?

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23782
Printed Date: August 17, 2025 at 3:03 AM

Topic: Back Up VIdeo Camera?

Posted By: carguy411
Subject: Back Up VIdeo Camera?
Date Posted: January 02, 2004 at 1:09 PM

im looking to install a video camera in the keyhole of a BMW. now the 2 cameras i can get area regular and a pinhole which should i get and is there a difference ?
also how do you go about doing it i just take the lock cylinder out and put the camera there and silicon around it?
please help thanks

Replies:

Posted By: carguy411
Date Posted: January 02, 2004 at 11:13 PM

ok ij ust found outthat thru the keyhole in the back you can use it as a valet mode and disamr the switch inside. now if i take the lock out can i just leave it behind the paneling will this do anything to the electrical
its on a 2000 328ci thanks

Posted By: carguy411
Date Posted: January 04, 2004 at 11:43 AM

can someone point me in the right direction with my 2 questions i been searching alll over and i cant see what the differences in the pin hole or regular matter. and also if this can be done with a 2000 328ci
dont mean to be a pain but this kid is driving me crazy saying he wants the camera in there
thanks

Posted By: jaheim
Date Posted: January 08, 2004 at 4:40 AM

Well I have a pinhole camera in my 1998 Jeep Grand Cherokee and i've enclosed a install picture. It was done prof so im not sure what they used to hold the camera. I also have a 03 330i BMW and might be getting a similar job done to it.

posted_image

Posted By: carguy411
Date Posted: January 08, 2004 at 9:18 AM

can u repost the picture or email it to me cause its not showing up thanks
bboy411@aol.com

Print Page | Close Window