2004 trailblazer sunvisors removal

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28328
Printed Date: May 10, 2025 at 2:42 AM

Topic: 2004 trailblazer sunvisors removal

Posted By: joker5150
Subject: 2004 trailblazer sunvisors removal
Date Posted: March 14, 2004 at 1:16 AM

im trying to install 7 inch sunvisor monitors in my 2004 trailblazer how do u remove the factory visors now there are no screws holding them in place just a plastic cover which wont come off and a small hole .?has any body done this

-------------
I love bass

Replies:

Posted By: kgerry
Date Posted: March 15, 2004 at 9:53 AM

there is a dedicated sequence you have to go through.... i removed one on my Envoy and it took about an hour....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: joker5150
Date Posted: March 16, 2004 at 1:31 AM

kgerry wrote:

there is a dedicated sequence you have to go through.... i removed one on my Envoy and it took about an hour....

can u please explain how i just broke one and it still hasnt come off

-------------
I love bass

Posted By: bigcletus94
Date Posted: April 17, 2004 at 2:38 PM

I know this is an old topic but thought I could be of some help to someone else who might need this info. There is a small hole on the round base where the visor arm attaches. I use a 90 degree pick tool (Snap-On) that has a very strong tip and place it in that hole on the base. You have to turn the visor left to right until it gets lined up properly. Basically, you push in with the pick and turn the visor several times and work it out. You have to be carefull though, because it is just a flimsy plastic assembly and it could be damaged easiliy.