2004 Suburban DVD/Inverter
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29754
Printed Date: June 07, 2024 at 9:54 PM
Topic: 2004 Suburban DVD/Inverter
Posted By: Northernliving
Subject: 2004 Suburban DVD/Inverter
Date Posted: April 05, 2004 at 8:07 PM
I’m in the process of mounting a Pyle DVD/VCR Combo with an FM modulator in my 2004 Suburban 2500. I bought two Vizualogic headrest monitors along with a 300watt inverter. I’ve mounted the DVD player, inverter and two headset transmitters in a nice aluminum tray that will mount under the bench seat behind the driver. I also bought a nice 12 volt 30 amp delay shut off that will leave the DVD player on for 15 minutes after I turn the car off. My question is this; I’m running 10 gauge wire from the aluminum tray (I fused it with a 30 amp fuse) up to a toggle switch under the dash. Where should I pick up 12 volts? There is a small fuse box that on the left side of the dash assembly, and a larger one under the hood. Where can I get a wiring diagram or info on where I might tap in? Thanks. If anyone is interested in pictures, I can shoot a couple. -North
Replies:
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:09 PM
Try again... I’m in the process of mounting a Pyle DVD/VCR Combo with an FM modulator in my 2004 Suburban 2500. I bought two Vizualogic headrest monitors along with a 300watt inverter. I’ve mounted the DVD player, inverter and two headset transmitters in a nice aluminum tray that will mount under the bench seat behind the driver. I also bought a nice 12 volt 30 amp delay shut off that will leave the DVD player on for 15 minutes after I turn the car off. My question is this; I’m running 10 gauge wire from the aluminum tray (I fused it with a 30 amp fuse) up to a toggle switch under the dash. Where should I pick up 12 volts? There is a small fuse box that on the left side of the dash assembly, and a larger one under the hood. Where can I get a wiring diagram or info on where I might tap in? Thanks. If anyone is interested in pictures, I can shoot a couple. -North
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:11 PM
Last try... I’m in the process of mounting a Pyle DVD/VCR Combo with an FM modulator in my 2004 Suburban 2500. I bought two Vizualogic headrest monitors along with a 300watt inverter. I’ve mounted the DVD player, inverter and two headset transmitters in a nice aluminum tray that will mount under the bench seat behind the driver. I also bought a nice 12 volt 30 amp delay shut off that will leave the DVD player on for 15 minutes after I turn the car off. My question is this; I’m running 10 gauge wire from the aluminum tray (I fused it with a 30 amp fuse) up to a toggle switch under the dash. Where should I pick up 12 volts? There is a small fuse box that on the left side of the dash assembly, and a larger one under the hood. Where can I get a wiring diagram or info on where I might tap in? Thanks. If anyone is interested in pictures, I can shoot a couple. -North
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:12 PM
I can't seem to read my posts! What's up? I’m in the process of mounting a Pyle DVD/VCR Combo with an FM modulator in my 2004 Suburban 2500. I bought two Vizualogic headrest monitors along with a 300watt inverter. I’ve mounted the DVD player, inverter and two headset transmitters in a nice aluminum tray that will mount under the bench seat behind the driver. I also bought a nice 12 volt 30 amp delay shut off that will leave the DVD player on for 15 minutes after I turn the car off. My question is this; I’m running 10 gauge wire from the aluminum tray (I fused it with a 30 amp fuse) up to a toggle switch under the dash. Where should I pick up 12 volts? There is a small fuse box that on the left side of the dash assembly, and a larger one under the hood. Where can I get a wiring diagram or info on where I might tap in? Thanks. If anyone is interested in pictures, I can shoot a couple. -North
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:16 PM
I can't read my posts - any ideas?
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:17 PM
I’m in the process of mounting a Pyle DVD/VCR Combo with an FM modulator in my 2004 Suburban 2500. I bought two Vizualogic headrest monitors along with a 300watt inverter. I’ve mounted the DVD player, inverter and two headset transmitters in a nice aluminum tray that will mount under the bench seat behind the driver. I also bought a nice 12 volt 30 amp delay shut off that will leave the DVD player on for 15 minutes after I turn the car off. My question is this; I’m running 10 gauge wire from the aluminum tray (I fused it with a 30 amp fuse) up to a toggle switch under the dash. Where should I pick up 12 volts? There is a small fuse box that on the left side of the dash assembly, and a larger one under the hood. Where can I get a wiring diagram or info on where I might tap in? Thanks. If anyone is interested in pictures, I can shoot a couple. -North
Posted By: Northernliving
Date Posted: April 05, 2004 at 8:18 PM
That was better! Looking forward to some help! If any one can delete the first several messages, have at it!
|