Fuses blowing
Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29847
Printed Date: May 10, 2024 at 9:22 AM
Topic: Fuses blowing
Posted By: hetherb
Subject: Fuses blowing
Date Posted: April 06, 2004 at 8:00 PM
I recently installed a PS2 w/ inverter, 7.2 LCD screen and FM modulator. It was working fine until I removed everything to mold screen in dash. Hooking everything back up like it was and my inverter fuse blows. I hooked it up just like https://www.caraudiomag.com/technical/0305cae_swap/
this . The cig. lighter fuse blows, I replace it, the fuse from the inverter blows, then the fuse in between the inverter and cig. lighter blows. What could I be doing wrong? The screen and sound work fine. Any suggestions, please!
Heather
Replies:
Posted By: Teamrf
Date Posted: April 06, 2004 at 9:08 PM
Sounds like you have a bad connection somewhere..check all your connections.
------------- ~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: hetherb
Date Posted: April 07, 2004 at 9:14 AM
I'll try reconnecting everything.I will let you know. Hopefully it will work! Thanks
Heather
Posted By: Ishinc
Date Posted: April 08, 2004 at 3:13 AM
you also want to check to see if you have any bare wires anywhere that may be shorting out with any metal parts of your car. Good luck!
Posted By: hetherb
Date Posted: April 08, 2004 at 2:46 PM
Thanks you, Ishnic and Teamrf! I rewired everything and it seems to be working fine. Something so small and I overlooked it! Thanks again!
Heather
|