Print Page | Close Window

Auto Dim Mirror wiring GNTX-100

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30591
Printed Date: July 21, 2025 at 4:47 AM


Topic: Auto Dim Mirror wiring GNTX-100

Posted By: FLBILL
Subject: Auto Dim Mirror wiring GNTX-100
Date Posted: April 18, 2004 at 6:01 AM

Hi--

     I hope some one might be able to help me figure this out. I recently got this Auto Dim mirror, a GenTex-100. It has three wires coming off it. I know one is 12 v hot, one is ground, and the other I think is reverse soignal disable. My question is which wire is which? Looking at the back of the mirror the wire plug socket  has the three pins horozantally  which the plug plugs into.  If anyone could tell me where the left , right and center pins (wires) go I would appreciate it  OK that's it then.

Thanks

Bill




Replies:

Posted By: dar1
Date Posted: April 18, 2004 at 9:05 PM

Hey Bill:

I don't know if this would be of any help but may be you could check the following website for information on hooking up Gentex mirrors:  www.mitocorp.com  they boost installation information hope this helps....



-------------
one love


Print Page | Close Window