Print Page | Close Window

pioneer navigation problem

Printed From: the12volt.com
Forum Name: Mobile Video, GPS, and Navigation
Forum Discription: Mobile Video Head Units, DVD Players, LCD and TFT Monitors, Navigation, GPS, PS2, PS3, XBox, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30698
Printed Date: June 08, 2024 at 7:49 AM


Topic: pioneer navigation problem

Posted By: eemore
Subject: pioneer navigation problem
Date Posted: April 19, 2004 at 8:07 PM

I have just installed the  Pioneer sys610T.  The problem is I get power to the head unit (it ejects CD, powers up), but I can't get a video signal from it.  I don't know if it works. 

The touch screen monitor works fine a plugged it into a dvd player and it works fine.

Does anyone know what's going on?




Replies:

Posted By: eemore
Date Posted: April 21, 2004 at 5:16 PM

Ok here's the story:

Called Pioneer today and described what's going on.  They stated that it sounds like a wiring problem and I should take it to a installation center to make sure it is wired correctly.  How else can you wire it?  I asked them, if I apply power to the constant and acc wire while grounding the black wire I should get something but I don't...NOTHING.

What will the installation center do that I haven't?

I've checked for 12+ on constant, 12+ when the acc in turned,it grounded, illumination wire is getting 4.5 volts, reverse is 12+ in reverse, park brake switch is grounded, vss not connected.

What more can be checked?


Print Page | Close Window